MOONS' Motors and Drives

Product Details:

Features :

• Closed Loop Step System with Servo Control
• Intelligent Built-in Controller
• Efficient, Smooth, Accurate & Fast
• Low Vibration, Low Noise, Low Heat
• Enhanced Motor Optimized Design

Product Details:

Features :

• 220VAC Input Drive
• Auto Tuning PID Gain Parameters
• Anti Resonance
• Internal Regeneration Resistor
• Build-in Soft PLC - Q Programmer
• Pulse Position Control Modes
• Analog Position, Speed, Torque Modes

Control Modes :

• Pulse Control
• Analog Control
• Field Bus Control
• Q Program

Inputs and Outputs :

• 12 Digital Inputs, 6 Digital Outputs
• 2 Analog Inputs
• 2 Line Receiver Inputs
• Encoder Feedback Output

Communications :

• SCL
• CANopen
• eSCL
• Ehternet/IP
• Modbus
• EtherCAT

Product Details:

Features :

• 20-70V DC Input Drive
• Easy to Use On-line Auto Tuning
• Internal Regeneration Resistor
• Build-in Soft PLC - Q Programmer
• Pulse Position Control Modes
• Analog Position, Speed, Torque Modes

Control Modes :

• Pulse Control
• Analog Control
• Field Bus Control
• Q Program

Inputs and Outputs :

• 12 Digital Inputs, 6 Digital Outputs
• 2 Analog Inputs
• 2 Line Receiver Inputs
• Encoder Feedback Output

Communications :

• SCL
• CANopen
• eSCL
• Ehternet/IP
• Modbus

Product Details:

Features :

• WideSpeed Control Range
• Excellent Speed Stability
• Compact and High Efficiency
• Low Power Consumption, Low Noise, Low Vibration
• Long Life and Low Maintanance Requirements
• Low Cogging Torque, Low Tourque Ripple

Control Mode :

• Velocity Control

Inputs and Outputs :

• 8 Digital Inputs, 2 Digital Outputs
• 1 Analog Input

Product Details:

The STM is an integrated all-in-one solution, fusing step motor and drive technologies into a single device, offering saving on space, wiring and cost over conventional motor and drive solutions.

Features :

• Anti Resonance
• Microstep Emulation
• Dynamic Current Control
• Torque Ripple Smoothing
• Stall Detection and Stall Prevention
• Command Signal Smoothing

Product Details:

Features :

• Accurate Position Control
• Precise Motor Speed
• Forward & Reverse, Pause and Holding Function
• Low Speed Operation
• Long Life

Product Details:

SRAC series ac stepper motor drives are based on current PID control algorithm design cost-effective segment type drive, is a compact, powerful digital stepper motor drives.And can be used to drive the ac power input, compared with traditional dc power input type of drive, has excellent high-speed characteristics;Large torque output;Low noise;Low vibration,etc.Each drive has a variety of parameter setting, through dial switch or rotary switch can quickly set the required parameters.

Features :

• Advance Current Control
• Anti Resonance
• Torque Ripple Smoothing
• Microstep Emulation
• Optional ac input voltage of 120V/220V switch

Product Details:

The SR series are compact, powerful, digital stepper drives feature advanced microstepping performance and sophisticated current control.All drive setup is done via dip or rotary switches.

Feature :

• Advance Current Control
• Torque Ripple Smoothing
• Microstep Emulation
• Anti Resonance

Product Details:

Specification : 

• Rated Output Power : 400W
• Rated Speed : 3000 RPM
• Max Speed : 6000 RPM
• Rated Torque : 1.27 NM
• Peak Torque : 3.8 NM
• Rated Current : 2.75 Amp
• Peak Current : 8.3 Amp
• Rotor Inertia : 0.272×10^-4 Kg.m²
• Shaft Load - Axial :  70 N (Max)
• Shft Load - Radial (End of Shaft) : 240 N (Max)
• Weight : 1.4 Kg

Product Details:

Specification : 

• Phase : 2
• Supply Voltage : 12 to 48 VDC
• Control Mode : Pulse Mode
• Output Current : 0.4 to 3 Amp
• Digital Input : 3
• Operating Temperature : 0-40⁰C
• Approval : CE, RoHS
• IP Rating : IP20
• Weight : 0.16 Kg

Product Details:

pecification : 

• Phase : 2
• Supply Voltage : 24 to 48 VDC
• Control Mode : Pulse Mode
• Output Current : 1 to 4.5 Amp
• Digital Input : 3
• Digital Output : 1
• Operating Temperature : 0-40⁰C
• Approval : CE, RoHS
• IP Rating : IP20
• Weight : 0.4 Kg

Product Details:

Specification : 

• Phase : 2
• Supply Voltage : 80 to 265 VAC
• Control Mode : Pulse Mode
• Output Current : 0.6 to 2.5 Amp
• Digital Input : 3
• Digital Output : 1
• Operating Temperature : 0-40⁰C
• Approval : CE, RoHS
• IP Rating : IP20
• Weight : 1.14 Kg

Product Details:

Specification : 

• Phase : 2
• Supply Voltage : 80 to 265 VAC
• Control Mode : Pulse Mode
• Output Current : 0.4 to 4 Amp
• Digital Input : 3
• Digital Output : 1
• Operating Temperature : 0-40⁰C
• Approval : CE, RoHS
• IP Rating : IP20
• Weight : 1.41 Kg

Product Details:

Specification : 

• Phase : 2
• Supply Voltage : 80 to 265 VAC
• Control Mode : Pulse Mode
• Output Current : 0.4 to 8 Amp
• Digital Input : 3
• Digital Output : 1
• Operating Temperature : 0-40⁰C
• Approval : CE, RoHS
• IP Rating : IP20
• Weight : 1.45 Kg

Product Details:

BLX Series realize the position control by using brushless servo and 1024 lines magnetic encoder. Meanwhile it also provides speed and torque control. The advantages of BLXSeries are low temperature raise, small in size, high efficiency. Compared to stepper, it has the features of low cogging torque, low noise, and low vibration. BLX Series cover the power range from 50W to 300W, and also have the gearhead motor options.

Features :

• Input Voltage 24-70V DC
• Low torque, Low noise, Low vibration
• Smooth Speed and Torque control
• Campact, High efficiency
• Support Q Program
• Position mode, Speed mode, Torque mode

Product Details:

Specification : 

• Rated Output Power : 750W
• Rated Speed : 3000 RPM
• Max Speed : 6000 RPM
• Rated Torque : 2.4 NM
• Peak Torque : 6.9 NM
• Rated Current : 4.5 Amp
• Peak Current : 13.5 Amp
• Rotor Inertia : 0.89×10^-4 Kg.m²
• Shaft Load - Axial :  90 N (Max)
• Shft Load - Radial (End of Shaft) : 270 N (Max)
• Weight : 2.6 Kg